Polysix-M S/H board connections       (c) Copyright 1997 Ricard Wolf
===============================

The S/H board is connected using an 8 pin connector and an additional wire.

The 8-pin connector connects exclusively to the KLM-367 circuit board
as follows:


Wire no.  Function   Connected to

0         D/A ch 6   KLM-367-IC19 pin 2
1         D/A ch 7   KLM-367-IC19 pin 4
2         +15V       KLM-367-IC12 pin 8
3         -15V       KLM-367-IC12 pin 4
4         -5V        KLM-367-IC19 pin 7
5         GND        KLM-367-IC19 pin 8
6         LFO        KLM-367-CN06 pin 1 (LFO)
7         MOD        KLM-367-CN06 pin 2 (MOD)


The single wire is connected from pins 1 and 2 of the TL072 on the S/H board
to the CW pin of the BEND RANGE pot KLM-369-VR3.